2013 KTM 450 SX-F


In Stock
Cascade Motorsports, Inc.
Primary Color
Trim Color
450 SX-F


Dealer Insights

Clean 2013 450 SX-F, comes with a skid plate,new rear tire, new chain and sprockets, moto seat, neken triple clamps,pro taper bar, desert tank, akrapovic silencer, and redbull graphics. This bike would make an awesome snowbike build or a good track bike!


A completely new, significantly lighter engine, featuring groundbreaking injection technology, guarantees brutal yet controllable power. Packed into a chassis, which has been improved massively in terms of bodywork, frame and suspension, the 2013 KTM 450 SX-F sets a new benchmark among the 450 four-strokes in terms of performance and maneuverability with its easy handling.

  • Design: 1-cylinder 4-stroke engine, water-cooled
  • Displacement: 449.3 cm³ (27.418 cu in)
  • Bore: 95 mm (3.74 in)
  • Stroke: 63.4 mm (2.496 in)
  • Starting aid: Electric starter
  • Gearbox: 4-gear, claw shifted
  • Engine lubrication: Pressure circulation lubrication with two Eaton pumps
  • Primary transmission: 32:76
  • Secondary ratio: 14:50
  • Cooling: Water cooling, permanent circulation of coolant by water pump
  • Clutch: Multidisc clutch in oil bath/hydraulically activated
  • Ignition: Contactless controlled fully electronic ignition with digital ignition adjustment
  • Frame: Central tube frame made of chrome molybdenum steel tubing
  • Fork: WP Suspension Up Side Down 4860 MXMA CC
  • Shock absorber: WP Suspension 5018 BAVP DCC
  • Suspension travel Front: 300 mm (11.81 in)
  • Suspension travel Rear: 330 mm (12.99 in)
  • Brake system: Disc brakes, brake calipers on floating bearings
  • Brake discs - diameter Front: 260 mm (10.24 in)
  • Brake discs - diameter Rear: 220 mm (8.66 in)
  • Chain: 5/8 x 1/4"
  • Steering head angle: 63.5°
  • Wheelbase: 1,495±10 mm (58.86±0.39 in)
  • Ground clearance, unloaded: 375 mm (14.76 in)
  • Seat height, unloaded: 992 mm (39.06 in)
  • Total fuel tank capacity, approx.: 7.5 l (1.98 US gal)
  • Super unleaded (ROZ 95/RON 95/PON 91)
  • Weight without fuel, approx.: 106.2 kg (234.1 lb.)
  • Clutch: A new DDS clutch (Damped Diaphragm Steel) with a wear-free steel cage is fitted to the new KTM SX-F engine, allowing use of thin steel discs for minimum overall width. The diaphragm spring, which preloads the package, not only reduces the operating force required to pull the clutch, but also provides space for integrated hub damping. The result: more traction and protection for the transmission. And with hydraulic clutch actuation from Brembo, the rider has everything under control right from the start.
  • Bodywork: Not only visually does the completely revamped bodywork indicate that the 2013 model year represents a new SX generation. Above all, the ergonomics and function of the plastics have been designed in such a way that the whole chassis and engine package forms a perfect harmony with the rider down to the very last detail. The fuel tank and spoiler have been restyled along with the airbox cover and the front fender, including the start number plate. A particular highlight is the new front fender, which has no ribbing whatsoever on the inside, thereby preventing mud build-up. A pioneering structure and improved attachment of the fender to the triple clamp result in up to 50% greater lateral stiffness.
  • Electric Starter: Every millisecond counts when starting. That's why the new KTM 450 SX-F can also be started simply at the press of a button. This is an invaluable benefit in the heat of a motocross battle.
  • Engine: Less weight, less maintenance. But, because you can't save on everything, the 449.3 cm³ (27.418 cu in)SOHC SX-F engine offers one major plus: more power. If you combine the 2 kilograms saved by the more compact design with the unbelievable 60 hp, you end up with unparalleled power development and handling previously unheard of in the MX1 class.
  • Cylinder Head: This is precision engineering: a cylinder head reconfigured for optimal motocross characteristics with a very broad rev range. In this extremely compact and lightweight construction, only one camshaft specially designed for the KTM SX-F actuates four titanium valves via weight-reduced rocker arms (DLC-coated on the intake side). Together with ultra-light valve springs and spring retainers, a maximum engine speed of up to 11,500 rpm can be achieved for maximum power.
  • Crankshaft: The crankshaft on the new KTM 450 SX-F with a 63.4 mm (2.496 in) stroke is equipped for 2013 with a revolutionary plain bearing in the lower conrod eye. This means that the conventional needle bearing is replaced by 2 press-fit bearing shells in the ultra-light Pankl connecting rod, which run directly on the crankshaft's additionally reinforced crank pin. The sliding bearing is supplied with oil directly from the pressurised oil circuit via the crankshaft. In other words: No problem when it comes to rev limits, and the need for servicing the crankshaft is halved. And, because the gyrating mass has been reduced, the bike has more bite and it's even more agile and dynamic.
  • Frame: The modern frame design of lightweight, high strength, chrome-molybdenum steel section tubes guarantees an ideal mix of longitudinal and torsional stiffness, resulting not only in easy handling and precise steering behaviour, but also in excellent ride stability. The four-stroke frames impress in MY 2013 with a stiffening of the frame triangle and thinner-walled down tubes. This leads to an improvement in tracking stability (increased torsional stiffness) accompanied by a reduction in weight. The engine braces to the cylinder head have also been optimised, along with their attachment to the frame. The frame bears a new colour on the KTM 450 SX-F 2013 and it is still the benchmark in terms of weight and stability.
  • Fork: The further improved 48 mm (1.89 in) upside-down fork featuring closed-cartridge technology has been optimised with completely revamped settings for perfect harmony with the new frame and engine. The new oil is significantly more wear-resistant and guarantees more consistent damping throughout both the course of a race and the bike's life cycle. A new lower triple clamp is 80 g (2.82 oz) lighter and, just like the upper triple clamp, CNC-machined from high quality aluminium, whereby the steering characteristics and hence the responsiveness of the fork have been noticeably improved.
  • Swingarm: The cast aluminium swingarm has been developed with state-of-the-art calculation and simulation software and constructed, in terms of design and wall thickness, for minimum weight with optimum stiffness and sufficient flex. For the 2013 model year, engineers have redesigned the rear section of the swingarm to allow installation of a thicker rear wheel axle (25 mm (0.98 in) instead of 20 mm (0.79 in)) for the benefit of better tracking stability. Moreover, they have succeeded in reducing weight by more than 100 g (3.53 oz) by revising the bolts, cups and nuts on the linkage.



Engine Type
1-cylinder 4-stroke engine, water-cooled
27.418 cu. in. (449.3 cm³)
Bore and Stroke
3.74 in. (95 mm) x 2.496 in. (63.4 mm)
Water cooling, permanent circulation of coolant by water pump
Contactless controlled fully electronic ignition with digital ignition adjustment


Front Suspension
WP Suspension Up Side Down 4860 MXMA CC
Front Brakes
Disc brakes, brake calipers on floating bearings
Rear Suspension
WP Suspension 5018 BAVP DCC
Rear Brakes
Disc brakes, brake calipers on floating bearings


Dry Weight
234.1 lb. (106.2 kg)
Fuel Capacity
1.98 US gal. (7.5 L)
58.86±0.39 in. (1,495±10 mm)
Ground Clearance
14.76 in. (375 mm)
Seat Height
39.06 in. (992 mm)


4-gear, claw shifted
Final Drive